...
| Code Block |
|---|
u-boot seco c61=> seco_config __________________________________________________ Choose boot Device for Kernel. __________________________________________________ 1) eMMC onboard 2) uSD onboard 3) TFTP 4) USB > 1 Choose the partition > 1 Path of the Kernel (enter for default Image) > __________________________________________________ Choose boot Device for FDT. __________________________________________________ 1) eMMC onboard 2) uSD onboard 3) TFTP 4) USB > 1 Choose the partition > 1 Path of the FDT (enter for default seco-imx8mm-c61.dtb) > __________________________________________________ Choose boot Device for FileSystem. __________________________________________________ 1) eMMC onboard 2) uSD onboard 3) NFS 4) USB > 1 Choose the partition > 2 __________________________________________________ Choose Video Output Configuration. __________________________________________________ 1) no video - no dtbo 2) eDP LCDIF-1920x1080 - seco-imx8mm-c61-lcdif-sn65dsi86.dtbo 3) LVDS LCDIF-1920x1080 - seco-imx8mm-c61-lcdif-sn65dsi84.dtbo > 2 __________________________________________________ Choose Board Options. __________________________________________________ 1) No addons > 1 Saving Environment to MMC... Writing to MMC(0)... OK |
By selecting the dtbo to perform, the The board will boot with your display configuration.
...