...
In Linux BSP 9.0, you can list the available files on the boot partition.
For example, with the μQ7SBC-C61:
| Code Block |
|---|
ls -l boot/ total 25604 -rw-r--r-- 1 secospa secospa 26073600 Sep 16 02:55 Image -rw-r--r-- 1 secospa secospa 6000 Sep 16 02:55 imx8mm_m4_TCM_hello_world.bin -rw-r--r-- 1 secospa secospa 16528 Sep 16 02:55 imx8mm_m4_TCM_rpmsg_lite_pingpong_rtos_linux_remote.bin -rw-r--r-- 1 secospa secospa 16028 Sep 16 02:55 imx8mm_m4_TCM_rpmsg_lite_str_echo_rtos.bin -rw-r--r-- 1 secospa secospa 40092 Sep 16 02:55 imx8mm_m4_TCM_sai_low_power_audio.bin -rw-r--r-- 1 secospa secospa 53688 Sep 16 02:55 seco-imx8mm-c61.dtb -rw-r--r-- 1 secospa secospa 2140 Sep 16 02:55 seco-imx8mm-c61-lcdif-sn65dsi84.dtbo -rw-r--r-- 1 secospa secospa 1797 Sep 16 02:55 seco-imx8mm-c61-lcdif-sn65dsi86.dtbo |
...
| Code Block |
|---|
u-boot seco c61=> seco_config __________________________________________________ Choose boot Device for Kernel. __________________________________________________ 1) eMMC onboard 2) uSD onboard 3) TFTP 4) USB > 1 Choose the partition > 1 Path of the Kernel (enter for default Image) > __________________________________________________ Choose boot Device for FDT. __________________________________________________ 1) eMMC onboard 2) uSD onboard 3) TFTP 4) USB > 1 Choose the partition > 1 Path of the FDT (enter for default seco-imx8mqimx8mm-c12c61.dtb) > __________________________________________________ Choose boot Device for FileSystem. __________________________________________________ 1) eMMC onboard 2) uSD onboard 3) NFS 4) USB > 1 Choose the partition > 2 __________________________________________________ Choose Video Output Configuration. __________________________________________________ 1) no video - no dtbo 2) eDP LCDIF-1920x1080 - seco-imx8mm-c61-lcdif-sn65dsi86.dtbo 3) LVDS LCDIF-1920x1080 - seco-imx8mm-c61-lcdif-sn65dsi84.dtbo > 2 __________________________________________________ Choose Board Options. __________________________________________________ 1) No addons > 1 Saving Environment to MMC... Writing to MMC(0)... OK |
...