...
| ||
|---|---|---|
Key | Type | Description |
MuteMode | DWORD | How to mute the device during no audio ouput. (see Mute Settings) |
MutePortAdr | DWORD | Address to write to, if MUTE_PORTADR is used. (see Mute Settings) |
MutePortSize | DWORD | Bus-width, if MUTE_PORTADR is used. (see Mute Settings) |
MutePortMute | DWORD | Value to write for mute, if MUTE_PORTADR is used. (see Mute Settings) |
MutePortUnMute | DWORD | Value to write for unmute, if MUTE_PORTADR is used. (see Mute Settings) |
MuteGPIOPin | DWORD | GPIO-Pin to use, if MUTE_GPIOPIN is used. (see Mute Settings) |
BassTreble | DWORD | Value to use for CSR1 register of UCB1400 |
Priority256 | DWORD | priority used for driver-threads |
InputSource | DWORD | Source of audio-input: 1: MIC, 2: LINE_IN |
CaptureLatency | DWORD | Capture-buffer-size in milliseconds. When using VOIP-applications, reducing capture-latency might be wanted. |
PlayLatency | DWORD | Play-buffer-size in milliseconds. When using VOIP-applications, reducing play-latency might be wanted. |
RecordGain | DWORD | See Record Gain Register (0x1C) of UCB1400-codec. Bits 0..7 are the gain setting for the right channel; bits 8..15 for the left channel. |
MicVolume | DWORD | See MIC Volume Register (0x0E) of UCB1400-codec. Set bit 6 (0x40) to enable 20dB boost |
WM9715ALC | DWORD | See ALC-Registers (0x60,0x62) of WM9715L-codec. The upper 16 bits are written to Reg60h, the lower to Reg62h. Default-value if not set is 0xB0323E00. |
...