...
Pin# | Name | Default Configuration | Alternate Function |
|---|---|---|---|
0 | GPIO0/CAM0_PWR# | Input, NoPull | |
1 | GPIO1/CAM1_PWR# | Input, NoPull | |
2 | GPIO2/CAM0_RST# | Input, NoPull | |
3 | GPIO3/CAM1_RST# | Input, NoPull | |
4 | GPIO4 | Input, NoPull | |
5 | GPIO5 | Input, NoPull | PWM* |
6 | GPIO6 | Input, NoPull | |
7 | GPIO7 | Input, NoPull | |
8 | GPIO8 | Input, NoPull | |
9 | GPIO9 | Input, NoPull | |
10 | GPIO10 | Input, NoPull | |
11 | GPIO11 | Input, NoPull | |
20 | USB0_EN_OC# | Output, OpenDrain, init low level | |
21 | USB1_EN_OC# | Output, OpenDrain, init low level | |
22 | USB2_EN_OC# | Output, OpenDrain, init low level | |
23 | USB3_EN_OC# | Output, OpenDrain, init low level | |
24 | USB4_EN_OC# | Output, OpenDrain, init low level | |
25 | USB_HUB_PEN | Output, PushPull, init low level | |
26 | USB_HUB_RST#_1V8 | Output, PushPull, init low level | |
27 | ENET0_RST#_1V8 | Output, PushPull, init low level | |
28 | ENET1_RST#_1V8 | Output, PushPull, init low level | |
29 | EDP_BRG_EN | Output, PushPull, init low level | |
30 | LCD0_VDD_EN | Output, PushPull, init low level | |
31 | LCD0_BKLT_EN | Output, PushPull, init low level | |
32 | LCD0_BKLT_PWM | PWM, disabled | GPIO |
33 | LCD1_VDD_EN | Output, PushPull, init low level | |
34 | LCD1_BKLT_EN | Output, PushPull, init low level | |
35 | LCD1_BKLT_PWM | PWM, disabled | GPIO |
36 | WIFI_DISABLE | Output, PushPull, init high level | |
37 | WIFI_CLK_EN | Output, PushPull, init low level | |
38 | WIFI_PWRDWN# | Output, PushPull, init low level |
*: Not available on RevA0
Carrier board BOOT_SEL configuration
...