...
i-PAN T7 II, Front and Back
Block diagram
...
Figure xxx: Simplified block diagram of i-PAN T7 II Baseboard
1 Connector Positions
Figure xxx: Connectors of i-PAN T7 II Baseboard
Connectors:
Reference | Function |
|---|---|
J215 | SODIMM Connector for Trizeps modules |
J216 | High Speed connector for Trizeps modules |
J502 | Raspberry Pi compatible camera connector |
J503 | µSD-Card connector |
J401 | Headset 3.5 Audio Jack (CTIA) |
J405 | Speaker connector extern |
J406 | Speaker connector intern |
J404 | Power connector |
J402 | µUSB connector |
J403 | USB A connector |
J501 | Ethernet connector RJ45 |
J203 | iMOD USB/I2C connector |
J204 | iMOD UART connector |
J217 | iMOD Button/I2C or UART connector |
J211 | iMOD CAN connector |
J303 | Display connector |
J302 | Touch connector |
Soldering Pads
Reference | Function |
|---|---|
J205 | SPI1_MOSI, GPIO |
J206 | SPI1_MISO, GPIO |
J201 | SPI1_CLK, GPIO |
J200 | SPI1_SS0, GPIO |
J210 | +3V3 |
J209 | Fastboot |
J202 | Ground |
J218 | MIC |
J219 | MIC_GND |
J212 | HEADPHONE_L |
J213 | HEADPHONE_R |
J214 | HEADPHONE_GND |
J304 | Ground |
J305 | Chassis Ground |
J407 rectangular | Speaker + |
J407 circular | Speaker - |
Miscellanous
Reference | Function |
|---|---|
BAT300 | Battery connector (CR1632) |
S200 | Fastboot |
S201 | BOOT_MODE 0 |
S202 | RESET_IN# |
S203 | Fastboot |
D200 | Duo LED (Power and GPIO) |
2 User connectors
J400: Power connector
...