...
Due to the similarities between the baseboards others like the pConXS III will work as well.
Audio
Audacity can be used to verify audio input and output functionality. A version that has been verified to work with Windows 10 IoT Enterprise on the Trizeps VIII Mini can be downloaded from github.
...
BusTools
Microsoft is offering open-source samples for using hardware interfaces in Windows. A compiled version of these samples can be downloaded here:
...
Navigate to the directory containing the MinComm.exe in the command prompt and execute the file.
If you have connected your baseboard to your computer via the RS232 interface you will be able to transfer symbols by pressing keys on your keyboard between the two devices.
...
PCIe
There is two ways to use the i.MX8M Minis PCIe interface on Trizeps8Mini:
...
Manual driver installation is very likely to be required to actually use the PCIe device.
...
CAN (only Trizeps VIII Plus)
The CAN interface of the i.MX8M Plus processor of the Trizeps8Plus can be tested with the “FlexCAN-interrupt” utility that comes with the BSP from NXP.
To test the CAN interfaces on a pConXS III simply connect two i-MOD CAN boards to the CAN interface of the pConXS III as described in the i-MOD CAN datasheet: i-MOD CAN - i-MOD standard
Connect the two CAN Interfaces with a male-to-male DB9 cable.
Use NXP’s FlexCAN_interrupt.exe (You can download it here:
| View file | ||
|---|---|---|
|
The result should look like this:
...