...
| Table of Contents | ||||
|---|---|---|---|---|
|
...
How can I power on my module?
SBC-3.5-PX30 board can be supplied with any voltage in the range +12VDC ÷ +24VDC range (recommended voltage range) via the Mini-Fit power in connector.
...
https://secogroup.atlassian.net/l/c/V7HNXfuN
...
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developedsoftware with different defaults can be built.
Contact your reference sales for further information.
...
What can I do now?
Build SECO BSP for i.MX and Rockchip boards
...
Downloads
Edgehog OS
Starting from Linux Kernel version 4.19, the Board Support Package (BSP) for this board is fully integrated within Edgehog OS, the operating system for the All-In-One IIot platform CLEA developed by SECO and based on Yocto. Edgehog OS is intended to provide the highest standards in terms of security and stability thanks to features like OTA (Over the Air) updates, double partitions, and fallback procedures. Edgehog OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.
Source code:
The source code for Edgehog OS can be found at the following link.
Binaries:
The binaries (U-Boot, Linux Kernel, Yocto image) associated with the various Edgehog OS releases can be found at the following link.
Check on this page How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
Legacy Software
This section contains releases (source code and binaries) for legacy BSPs Yocto.
Source code:
Source code for Linux kernel and u-boot is available here and here the instruction to flash Linux binaries.
...