...
Pin# | Name | Default Configuration | IRQ | Alternate Function | ||||
|---|---|---|---|---|---|---|---|---|
0 | GPIO4 | Input, NoPull |
|
| ||||
1 | GPIO5 | Input, NoPull |
| PWM | ||||
2 | GPIO6 | Input, NoPull |
|
| ||||
3 | GPIO7 | Input, NoPull |
|
| ||||
4 | GPIO8 | Input, NoPull |
|
| ||||
5 | GPIO9 | Input, NoPull |
|
| ||||
6 | GPIO12 | Input, NoPull |
|
| ||||
7 | GPIO13 | Input, NoPull |
|
| ||||
8 | BT_IRQ# | (only usable as IRQ source) |
|
| ||||
9 | RTC_INT#_3V3 | (only usable as IRQ source) |
|
| ||||
10 | SMB_ALERT# | (only usable as IRQ source) |
|
| ||||
11 | USB0_EN_OC# | Output, OpenDrain, init low level |
|
| ||||
12 | USB1_EN_OC# | Output, OpenDrain, init low level |
|
| ||||
13 | USB2_EN_OC# | Output, OpenDrain, init low level |
|
| ||||
14 | USB3_EN_OC# | Output, OpenDrain, init low level |
| |||||
15 | USB4_EN_OC# | Output, OpenDrain, init low level |
| |||||
16 | CPU_IRQ# | Input, NoPull |
| |||||
17 | LID# | Input, NoPull | ||||||
18 | BATLOW# | Input, NoPull | ||||||
19 | USB0_OTG_ID | Input, NoPull | ||||||
20 | RESET_OUT# | Output, PushPull, init low level, set high ~100ms after startup (-> SMARC Spec.) | ||||||
21 | SDIO_PWR_EN_3V3 | Output, PushPull, init high level | ||||||
22 | USB0_VBUS_DET | Input, NoPull | !!!! ggf an PM7325 GPIO_09 !!!! | 23 | WIFI_DISABLE | Output, PushPull, init high level | ||
2423 | LCD0_VDD_EN | Output, PushPull, init low level | ||||||
2524 | CHARGER_PRSNT# | Input, NoPull | ||||||
2625 | CHARGING# | Input, NoPull | ||||||
2726 | ENET_SDP_TRANSL_EN | Input, NoPull | ||||||
2827 | WIFI_PWRDWN#_3V3 | Output, PushPull, init low level | ||||||
2928 | USB_HUB_RST# | Output, PushPull, init low level |
| |||||
| ||||||||
TBD | WIFI_WAKE# | |||||||
TBD | USB0_VBUS_DET_5V | Input, NoPull | !!!! ggf an PM7325 GPIO_09 !!!! |
*: Polled IRQ
Carrier board BOOT_SEL configuration
...