...
If the interface creates a COM-port, to which you can send AT-modem-commands, you should insure, that the following keys are added to the drivers driver registry-key:
Code Block |
---|
"FriendlyName"="My Modem" "Tsp"="Unimodem.dll" "DeviceType"=dword:2 "DevConfig"=hex:10,00,00,00,05,00,00,00,00, 01,00,00,00,4B,00,00,00,00, 08,00,00,00,00,00,00 |
...
Start → Settings → Network and Dial-up Connections
.Press
Make New Connection
.Name your connection and select
Dial-Up Connection
.Press
Next
.Now choose the modem. If your modem does not appear here, check wether the keys at Preparation exist and if you selected the correct DeviceType.
Select
Configure..
and enter theCall Options
-tab. In theExtra Settings
add a call string:Code Block +CGDCONT=1,"IP","APN_NAME"
APN (Access-Point-Name) is provided by your internet or SIM-card-provider. i.e. if you would use O2 this would be
Code Block +CGDCONT=1,"IP","surfo2"
Press
Next
.In the
Phone Number
-field enter *99# or *99***1# (depends on your provider).Leave the other fields untouched and press
Finish
.
...