...
This application note will guide you through the steps needed, to create your own Windows Embedded CE 6 image. This is demonstrated for a BSP for Trizeps V, but the steps will almost also apply for other Trizeps-boards.
...
First of all you need to install Microsoft's Platform Builder for Windows Embedded CE 6.0:
Visual Studio 2005
Visual Studio SP1 (Service Pack 1)
Windows Embedded CE 6.0 (Platform-Builder Plug-In for Visual Studio 2005)
Windows Embedded CE 6.0 SP1 (Service Pack 1)
Windows Embedded CE 6.0 R2 Update
Windows Embedded CE 6.0 R3
Windows Embedded CE 6.0 Cumulative Product Update Rollup Package (through 12/31/2012)
Remaining Windows CE 6.0 QFEs
If asked during install for which platforms, you must select ARMV4I and XScale. If you already have an installation, you can add those platform, by running the Platform-Builder installer. Before using the latest Trizeps-BSP, update the Platform-Builder using Windows Embedded CE Downloads.
Install the Keith&Koep Seco BSP for Trizeps V.
Creating a new Project
Start Visual Studio 2005 and select
File –> New Project..
...
nk_ram.nb0 ( Image will be loaded to RAM and execute).
nk_rom.nb0 ( Image will be stored to flash (uncompressed); view Flash Division of Trizeps I to VI, because this file is usually too large).
nk_zip.nb0 ( Image will be stored to flash (compressed))
...
After your created those images you may proceed to download them to your Trizeps-module. Take a look at the bootloader documentation for information on how to do this.
In the next step you might want to add further features or delete some to reduce size or licensing cost.
Download
Demo-Project: ce6demo_2008_10_14.zip
Retail-Image: ce6demo_tr5conxs_2008_10_14.nb0