...
I2C-Address: 0x40 (7-bit) | ||||
Register | Name | Access | Description | Default Value |
0x01 | REG_ID | read | ID-Register | 0x96 |
0x02 | REG_CONTROL | write | Restart and boot with BOOT_MODE= 0x04 - Shutdown (Hard) | - |
0x03 | REG_CONFIG | - | - | - |
0x04 | REG_PIN_CONFIG | write | <Pin> <Parameter> 1: Input, NoPull 20: Output PushPull, init low level | - |
0x05 | REG_PIN_SET | write | <Pin> <Level> | - |
0x06 | REG_PIN_GET | write | <Pin> | - |
0x07 | REG_PWM_CONFIG | write | <Pin> <Duty Cycle [%]> | - |
0x08 | REG_SECO_CODE | read | Read SECO_CODE | - |
0x09 | REG_INT_STATUS | read | Read INT_STATUS register, clear it and reset EC_IRQ#_OD to “1” 0x01: RTC_INT# | 0x00 |
0x0A | REG_INT_ENABLE | write | Enable or disable interrupts. 0x01: RTC_INT# | - |
0x0B | REG_ALTERNATE_ | write | Set Pin to specific alternate function. <Pin> <Alternate Function> Alternate Functions: | - |
0x0C | REG_RAM_CODE | read | Read RAM_CODE* 0x4 - 4GB RAM | - |
0xF0 | REG_VERSION | read | Read firmware version | 0xD5** |
...
...
0x01 |
...
Configurable GPIO Pins (I2C)
...
Pin# | Name | Default Configuration | Alternate Function | |
---|---|---|---|---|
4 | GPIO4 | Input, NoPull | ||
5 | GPIO5 | PWMInput, 0% duty cycleNoPull | GPIOPWM | |
6 | GPIO6 | Input, NoPull | ||
7 | GPIO7 | Input, NoPull | ||
8 | GPIO8 | Input, NoPull | ||
9 | GPIO9 | Input, NoPull | ||
10 | GPIO10 | Input, NoPull | ||
11 | GPIO11 | Input, NoPull | ||
12 | GPIO12 | Input, NoPull | ||
13 | GPIO13 | Input, NoPull | ||
20 | USB0_EN_OC# | Output, OpenDrain, init low level | ||
21 | USB1_EN_OC# | Output, OpenDrain, init low level | ||
23 | USB3_EN_OC# | Output, OpenDrain, init low level | ||
26 | USB_HUB_RST#_1V8 | Output, PushPull, init low level | ||
37 | WIFI_CLK_EN | Output, PushPull, init low level | ||
38 | WIFI_PWRDWN#_1V8 | Output, PushPull, init low level | ||
39 | BATLOW# | Input, NoPull | ||
40 | CHARGING# | Input, NoPull | ||
41 | CHARGER_PRSNT# | Input, NoPull | ||
42 | RESET_OUT# | Output, PushPull, init low level, set high ~100ms after startup (-> SMARC Spec.) |
...