...
Example 2:fuseburn 4
ereg
boot mmc picture.tft
.storeburn mmc nk.nb0
monitor com1
This example
burns the fuse to disable pcmcia-boot.
erases the persistant-registry.
stores the boot-picture.
updates the CE-image.
stop.
.storeburn will only evaluate if the CE-image has been updated successfully.
image.dat
Configure one Trizeps to contain the correct image, bootloader and all registry-settings, flashdisk-contents etc.
Delete default.mky and system.mky in the flashdisk-folder.
Take a copy of the whole flash contents using the flashupdate-tool ( Option /DA).
Deployment
Fit SD-cards.
Fit Trizeps-modules.
Apply power to all sockets. ( Should be done at nearly the same time, because delayed switching of one socket, could break the update-process of the others.
Work LED is shown.
If Good-LED lights, this socket is finished.
If Fault-LED lights, there must have been an error. i.e. the bootloader could not read the SD-card or an error occured during verify of the flash-content.
Power off all sockets and remove Trizeps-module.
Extra Notes for Trizeps VI
...