(This page is currently under construction and the following informations are preliminary)
Generals
Description
SMARC Standard
The SMARC (“Smart Mobility ARChitecture”) is a versatile small form factor computer Module definition targeting applications that require low power, low costs, and high performance. The Modules will typically use ARM SOCs similar or the same as those used in many familiar devices such as tablet computers and smart phones. Alternative low power SOCs and CPUs, such as tablet oriented x86 devices and other RISC CPUs may be used as well.
The Module power envelope is typically under 6W although designs up to about 15W are possible.
Processors
Qualcomm QCS Family:
QCS5430 2x Arm® Cortex®-A78 @2.1 GHz, 4x Arm® Cortex®-A55
QCS6490 1x Arm® Cortex®-A78 @2.7 GHz, 3x Arm® Cortex®-A78 @2.4GHz, and 4x Arm® Cortex®-A55 @1.8 GHz
Graphics
Integrated Graphics Processing Unit Qualcomm® Adreno™ 642L (QCS5430)
Integrated Graphics Processing Unit Qualcomm® Adreno™ 643L(QCS6490)
supports 2 independent displays, OpenGL , Open CL , Vulkan.
A 64-bit LPDDR5-6400 interface is used for memory. There are a number of other interfaces for connecting peripherals, such as displays, cameras and sensors, which are extended by components already available on the module:
Video Interfaces
LVDS dual channel 18/24 bit, eDP V1.4, MIPI DSI 4 lanes,
Display Port through USB 3.1 Type C
Video Resolution
Primary display: FHD+ @120 fps
Secondary display: up to 4k Ultra HD @60Hz
Embedded VPU
supports H/W decoding of HEVC/H.265, AVC/H.264
supports H/W encoding of HEVC/H.265, AVC/H.264
Mass Storage
eMMC 5.1 Drive soldered on-board, up to 64GB
SD 4-bit interface (boot device) opt. UFS 2.x/3.1 flash
2x 1Gbit Ethernet
1x USB 3.1, 1x USB 2.0 OTG , 1x USB 2.0 or 4x USB 2.0 (Hub option)
1x 2-Line MIPI CSI ,2x 4-Line MIPI CSI, with ISP support
I2C
SPI
TPM
RTC
Watchdog
EEPROM
PWM
Powermanagement
PCI Express
PCIe lanes Gen3: 2 ports x1 lanes, 1 port x2 lanes (QPS615)
2x I2S Audio interface
Serial ports
2 x UART Tx/Rx/RTS/CTS
2 x UART Tx/Rx
1 x CAN via SPI
Power supply voltage: +5V DC (+5V Standby opt)
Ultra Low Power RTC
Technical Documents
At the following Links you will find the technical documentation link Manual and Rev. specific Instructions
Operatingsystems
Supported Software SOM-SMARC-i.MX93