Versions Compared

Old Version 9

changes.mady.by.user Giuseppe Pagano (Deactivated)

Saved on

compared with

New Version Current

changes.mady.by.user Luca Pisani

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

It is possible to install Android 11 on the following boards:

SBC-

C61 SECO Board.

3.5-MX8M-Mini (C61)

SECO Android 11 BSP supports every possible C61 configuration, regardless ram all SBC-3.5-MX8M-Mini (C61) configurations (RAM size, eMMC size and peripheral, peripherals).

You can also use all installation methods described below to install Android 11 on the C61.

Running Android 11 on SBC-3.5-MX8M-Mini (C61) board with 1 Giga of ram, but clearly the performance will be reduced, and it will be possible to run only 1 single application after startup.

Running Android 11 on SBC-C61 board with 1 Giga RAM is deprecated.

You can install Android 11 on C61 board following one of the procedures described below.

Choose an Android 11 installation procedure:

Image Removed

Via OTG cable

Image Removed

Using uSD card

Image Removed

Using USB key

RAM is deprecated. If you use it, you will find that performance is reduced and only a single application can be run after startup.

SBC-3.5-MX8 (C43)

SECO Android 11 BSP supports all SBC-3.5-MX8 (C43) configurations (regardless RAM size, eMMC size, and peripherals).

The SBC-3.5-MX8 (C43) board only supports the usb OTG cable installation procedure, and does not support the uSD/USB procedures.

Android 11 support for SECO SBC boards includes:

  • Wifi/BT

  • USB otg/ADB

  • Sound support

  • HDMI and LVDS display + touchscreen support

  • Double ethernet card

  • OTA update

Installation Methods

You may use any of the following three methods to install Android 11 on SECO boards:

  1. via an OTG cable;

  2. using a uSD card;

  3. using a USB flash drive.

Your board may not support all three methods (see above).

Image Added

OTG cable installation

Image Added

uSD card installation

Image Added

USB key installation

Anchor
otg
otg
HOW TO install SECO Android 11 BSP on onboard eMMC via OTG cable

Info

Requirements

  • A Linux or windows PC

  • And USB OTG cable

To flash Android 11 on SECO board using a OTG cable, please follow these simple steps:

  1. Download the correct SECO Android 11 image for your board

referring

  1. according to the SECO BSP table.

Identify the

  1. Insert jumper for

RECOVERY BOOT on the board, and insert it. Refer to the table a the bottom of this page for identifying the RECOVERY BOOT JUMPER on the board.Connect

  1. board RECOVERY boot (refer to RECOVERY BOOT JUMPER table to locate it)

  2. Connect the OTG cable between Board and PC (refer to OTG connector TABLE for locating it).

  3. Power

On

  1. on the board

There are different procedures

  1. Follow the procedure according to the system that you are using:

Flashing from Linux

  • Extract the downloaded archive

    • tar xzf <ANDROID_11_BSP>.tar.gz

  • Enter in Change to the uncompressed folder

    • cd <ANDROID_11_BSP_FOLDER>

  • Execute the script “android_flash.sh" with superuser privileges

    • sudo ./android_flash.sh

  • Wait until the end of the procedure

  • Power off, remove jumper and connection

  • Restart the board

Flashing fron from Windows

  • Extract the downloaded archive

  • Open Windows terminal console

  • Enter in Change to the <Android_BSP_folder>

    • cd Android_BSP_folder

  • Copy the right partition file to name “partition-table.img”

    • copy partition-table-13GB-ab.img partition-table.img

  • Execute “android_flash.bat batch file

    • android_flash.bat

  • Wait until the end of the procedure

  • Power off, remove jumper, and connection

  • Restart the board

Anchor
usd
usd
HOW TO install and boot SECO Android 11 BSP on external uSD card

Info

Requirements:

  • A Linux PC

  • An empty uSD CARD (min size = 8 GB)

To prepare a bootable Android 11 uSD for SECO board, please follow these simple steps:

N.B. To follow this procedure, please use a Linux PC

  1. Download the correct SECO Android 11 image for your board

referring

  1. according to

the

  1. SECO BSP table.

extract

  1. Extract the downloaded image:

    Code Block
    tar xzf <ANDROID_IMAGE_FILENAME>.tar.gz
enter

  1. Enter in the Android IMAGE folder:

    Code Block
    cd <ANDROID_IMAGE_FOLDER>

  2. Insert a clean uSD card in the card reader of your Linux computer

  3. Identify the path to your uSD card:

    Code Block
    lsblk
execute

  1. Execute the script android_

sd

  1. write_

create

  1. device.sh to flash the card

    Code Block
    ./android_write_device.sh /dev/<PATH_TO_SD_CARD>

To boot from uSD card

  1. Identify the jumper for ALTERNATE BOOT on the board

,

  1. and insert it. Refer to

the table a the bottom of this page for identifying the

  1. ALTERNATE BOOT JUMPER

on the board

  1. table to locate it.

  2. Insert the uSD card in the

cad

  1. card slot

solder in

  1. on the board.

  2. Power

On

  1. on the board

Anchor
usb
usb
HOW TO install SECO Android 11 BSP from USB key

Info

Requirements:

  • A Linux or Windows PC

  • An empty USB KEYflash drive

  • A SECO board with at least a bootable uU-boot Boot on it [*]

[*] If your system is not bootable, you

cant install Android via USB

can't use USB key for installation. Please write a valid u-boot bootloader on the board using one of the previous procedures

to flash it

This procedure is split can be done in 3 steps:

STEP 1)

  • Download the SECO Unified Installation Key (SUIK) image from this link: SUIK IMAGE

  • Unzip the downloaded file.

  • Write the binary USB recovery key image on the USB pen.

If you do not know how to write a raw image on a USB stick, please refer to this procedure:

Write a raw image on USB key using Rufus

STEP 2)

  • (Use dd tool from Linux OS, or Rufus, Win32 Disk image or equivalent tools, to write the usb key image from a Windows systems)

STEP 2

  • Download the Android11 image for the selected board. Please refer to table “SECO ANDROID 11 BSP table“ to choose the right one.

  • Extract the downloaded image on the first partition of the USB key (FAT32 filesystem with the label “IMAGES”) and rename the target folder to ANDROID.

  • Disconnect the USB key from the PC

STEP 3)

  • Insert the SUIK USB key on one USB port of the SECO Board

  • Power on the board.

You can follow the installation process via

  • At startup open the serial console and execute the following commands:

    Code Block
    mount /dev/sda1 /mnt
cd /mnt/ANDROID/
./android_write_device.sh /dev/mmcblk0

  • Wait until fashing script procedure has finished

Anchor
and_bsp_tb
and_bsp_tb
SECO ANDROID 11 BSP table

BOARD

BSP name

Download link

-

USB SECO Unified Installation Key

SUIK IMAGE v0.

1

2

C61

Android 11

C61 Android 11

C61-1GB

Android 11 (low memory version 1GB)

C61-1GB Android 11

C43

Android 11

C43 Android 11

Anchor
rec_boot_jps_tb
rec_boot_jps_tb
RECOVERY BOOT JUMPER (BOOT from usb OTG)

BOARD

Jumper name

Position

Picture

SBC-C61

CN52

1-2

Image Removed

Image Added

SBC-C43

JP2

2-3

Image Added

Anchor
otg_conn_tb
otg_conn_tb
OTG connectors

BOARD

Connecton name

Picture

SBC-C61

CN36-OTG

Image Removed

Image Added

SBC-C43

CN44

Image Added

Anchor
alt_boot_jps_tb
alt_boot_jps_tb
ALTERNATE BOOT JUMPER (boot from uSD)

BOARD

Jumper name

Position

Picture

SBC-C61

CN52

2-3

Image Removed
Image Added