Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Yuo can debug most of the board from Seco using a serial connection.

Typically serial debug can be accessed via TTL or RS232 connector on the board with standard protocol configuration 115200 8N1.

Serial Console on Linux

On Linux the simplest way to connect a serial console is using the program “minicom”. You can install this tool with the command:

sudo apt-get install minicom

After installation, you can open a console terminal and launch:

sudo minicom -b 115200 -D /dev/ttyUSB0

Serial Console on Windows

There are lot of different program on Windows that can be used to manage a serial console.

We suggest to use Teraterm, but also putty or minicom under WSL are also a valid options.

To use Tera Term just download and install it from opensource projecet: https://osdn.net/projects/ttssh2/releases/ .

  • Search and execute Tera Term from Windows launcher with administrative privilege

  • At startup select serial protocol and the correct USB Serial Port

  • open settings menu and select 115200 from baudrate

  • save and return to main windows

  • Startup the connected board

  • No labels