Seco developed the i-MOD standard to ease the extension of baseboard functionality.
Reusing the same extension connectors on multiple Seco baseboards will allow customers to select between a variety of extension boards.
Customers may select to build their own extension, which can be reused with our baseboards.
i-MOD Interface 10pin FCC
The i-MOD interface connector uses a 10pin 0.5mm pitch flat-cable-connector.
One idea is to reuse the same connector for different interfaces.
The basic pinning is such (seen from the view of the baseboard):
Pin | Function |
|---|---|
1 | +5V or Input |
2 | differential IO or Input |
3 | differential IO or Input |
4 | GND |
5 | +3V3 |
6 | Output |
7 | Input |
8 | Output |
9 | Input |
10 | Output |