| There are no images attached to this page. |
Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
SOM-uQ7-MX6-2 is an extremely low power and low cost μQseven Rev. 2.0 Compliant Module with the NXP i.MX6 Processor. It features all the native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX6 product family, along with dedicated hardware and software development support.
For ordering purposes, the SOM-uQ7-MX6-2 is referred to by its base code, “A75”.
INDEX
How can I power on my module?
https://secogroup.atlassian.net/l/c/V7HNXfuN
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.
What can I do now?
Blog Posts
-
How to Create a Recovery USB for SBC-3.5-PX30 (D23)
created by
02. Feb 2024
-
How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
created by
02. Feb 2024
-
Create a bootable device for ARM ROCKCHIP
created by
08. Jun 2022
-
Display Configuration Guide
created by
08. Oct 2021
-
Build SECO BSP for i.MX and Rockchip boards
created by
21. May 2021
-
Create a bootable device for ARM i.MX BSPs
created by
21. May 2021
-
Configure the host PC
created by
21. May 2021
Downloads
Source code:
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries:
Here you can find the latest binaries available
Board configuration | Version | image | filesystem | u-boot | kernel |
|---|---|---|---|---|---|
256M 1x256M | 4.19.35 - 3.4.0 | ||||
512M 2x256M | 4.19.35 - 3.4.0 | ||||
1G 2x512M | 4.19.35 - 3.4.0 |