ICARUS is a PicoITX compliant module with the Intel^® Atom^® x6000E Series and Intel^® Pentium^® and Celeron^® N and J Series processors. Designed and optimized for Functional Safety (FuSa) applications, this module offers flexibility, reliability, and safety for a wide range of applications across multiple industries.

For ordering purposes, the ICARUS is referred to by its base code, “D63”.

INDEX

• How can I power on my module?

• What will I find in my module?

• How can I update BIOS?

• What can I do now?

How can I use GPIO/I2C/SPI peripherals?

D63 has 2 connectors to use GPIOs and other peripherals like I2C, SPI, PWM and QEP. Here you can find the schematic:

To make those functionalities available on all boards, and for more flexibility, they are not multiplexed by HW, but is all managed in the BIOS setup. Here you can find a table on where functionalities are available:

By default, all pins are set as Input Hi-Z. So, if you want to use another funtionality, you need to enable it on setup. Here is a table on how to enable peripherals and what you can use simultaneously:

What is loaded in a standard module?

Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built in accordance with customers' requirements submitting a new ticket.

The BIOS version updated in your module is shown in Aptio Setup Utility menu under:

• Main page

• Advanced > SMBIOS Information page

Updating the BIOS

https://secogroup.atlassian.net/l/c/6PB1jhmQ

Downloads

Here you can find the latest version available: