Myon II Nano
- Sven Hillger
- Anu Selvaraj (Deactivated)
Depending on configuration and following revisions, the board’s features are subject to change. Please visit www.seconorth.com to find updated information.
1. Description
The Myon II Nano is powered by NXP i.MX 8M Nano processor, which is designed to meet the latest market requirements of connected streaming audio/video devices, scanning/imaging devices and various devices demanding high-performance and low-power.
The i.MX 8M Nano family of processors features advanced implementation of a quad ARM® Cortex®-A53 core, which operates at speeds of up to 1.5GHz. A general purpose Cortex®-M7 core processor is for low-power processing. A 16-bit LPDDR4 is used for memory. There are a number of i.MX 8M Nano interfaces for connecting peripherals, such as displays, cameras, GPS and sensors, which are extended by module components such as a stereo hi-fi quality audio-codec.
The Myon II module got two 100pin Hirose DF40 connectors. The pinning of both connectors is to a large extent compatible to Myon I. The main difference is the additional RGMII-GBit Ethernet interface.
Difference to Myon II
The i.MX 8M Nano processor of Myon II Nano is similiar to the i.MX 8M Mini processor used on Myon II, but has less features.
The Myon II has more interfaces:
VPU
PCIe
two USB2.0 ports, instead of only one.
32bit instead of 16bit LPDDR4.
The GPIO pinning between both modules is kept the same for maximum compatibility.
2. Technical Info
Hardware Features
PinOut Structure
Block Diagram
3. Get Started
3.1 Step-by-step Guide
Power On
Build
Flash
3.2 FAQ/Troubleshooting
4. Software
4.1 BIOS
Flash’n’Go Boot
uBoot
4.2 Operating System
Windows
Linux
4.3 Tools
5. Accessories
| 1 |
|
| 2 |
|
| 3 |
|
6. Revision History
Revision | Date | Changes | |
|---|---|---|---|
| 1 |
|
|
|
| 2 |
|
|
|
7. Errata / Known Issues
ID | Date | Link | |
|---|---|---|---|
| 1 |
|
|
|
| 2 |
|
|
|