Myon I with antenna

Myon I without antenna, size comparison with SD-Card

Depending on configuration and following revisions, the board’s features are subject to change. Please visit www.seconorth.com to find updated information.

1 1. Description
2 2. Technical Info
3 3. Get Started
- 3.1 3.1 Step-by-step Guide
- 3.2 3.2 FAQ/Troubleshooting
4 4. Software
- 4.1 4.1 BIOS
- 4.2 4.2 Operating System
- 4.3 4.3 Tools
5 5. Accessories
6 6. Revision History
7 7. Errata / Known Issues

1. Description

The Myon I is the first module in a series of modules using the MicroModule SOM standard. It is powered by a 64-bit Qualcomm Snapdragon 410E Quad-core Arm® Cortex A53 processor and features all things needed to build a complete and small solution. Power-Management, BatteryCharger, Storage-Memory, RAM, LVDS-Transceiver, Audio, Wireless-LAN, Bluetooth and GPS are already integrated on the module and only a single power-source is needed to have a fully functional system.

Additional peripherals may be added through two 100pin Hirose DF40 connectors. The IO-Ports use a voltage level of 1.8V. There are two main mounting options:

UFL-Antenna Connectors or On-Board Antennas.
LVDS or Mipi Display Interface

2. Technical Info

Hardware Features

PinOut Structure

Block Diagram

3. Get Started

3.1 Step-by-step Guide

Power On

Build

Flash

3.2 FAQ/Troubleshooting

4. Software

4.1 BIOS

Flash’n’Go Boot

uBoot

4.2 Operating System

Windows

Linux

4.3 Tools

5. Accessories

1
2
3

6. Revision History

	Revision	Date	Changes

	Revision	Date	Changes
1
2

7. Errata / Known Issues

	ID	Date	Link

	ID	Date	Link
1
2