/
Trizeps VI
  • In progress

    • Trizeps VI

    Owned by Anu Selvaraj (Deactivated)
    Last updated: 20. Mar 2024 by Michael Schieren
    2 min read

    End Of Life (Ende Produkt-Lebenszyklus) for Trizeps VI with PXA168 (800/1100 MHz). For more information, please see below.

    Front / Back

    Description

    • Marvell Sheeva PXA168 CPU up to 1.1 GHz (core compatible to well known: XScale technology)

    • 128 or 256 MByte DDR2-RAM (512MB possible as soon as DDR2 with this density availlable)

    • 128,256 or 512 MByte NAND-Flash

    • 1 x Micro SD Socket on board ( storage enhancement up to 32GB with uSDHC-cards possible.)

    • LCD support up to WUXGA (1920×1200), 12/16/18 and 24bpp active or passive color panels.

    • 1 x USB 2.0 Highspeed Host

    • 1 x USB 2.0 Highspeed OTG (Host+Slave)

    • PCI-Express

    • WLAN 802.11 b/g

    • BT v2.0 + EDR

    • 100/10 MBit Ethernet.

    • 3 Serial Interfaces (UART)

    • 2 x SD/MMC/SDIO card interface, 4Bit wide

    • 4-in-1 card reader (xD-memory, MMC, SD, Memory Stick)

    • Compact Flash card interface

    • Camera Interface

    • SPI, I2C, PWM

    • CPLD (128 or 256 Macrocells)

    • 20 Bit Stereo, low-noise design, programmable sampling rates, headphone out

    • Line input stereo and Microphone input (mono) for electret-capacitor microphones

    • 4-wire resistive touch interface

    • 4 x 10 Bit ADC

    • DDR-SODIMM-200 connector (eg. AMP 1376408-1) compatible to Trizeps-III, Trizeps-IV, Trizeps-IV WL and Trizeos-V series.

    • High efficency switch-mode core voltage regulator with dynamic core voltage support

    • Supply with single +3V3 or direct LiIon input (Assembly Option)

    Technical Documents

     

    Software

    Baseboard & Panels

    The Trizeps VI fits into following Seco products: