Connect a LVDS Display to a Trizeps

1 Schematic
- 1.1 Sample Schematic for a LVDS-Display
2 Signals

Applies to: Trizeps IV(M), Trizeps IV WL, Trizeps V, Trizeps VI.
See also: Display, bitmapboot.

Schematic

Sample Schematic for a LVDS-Display

Signals

This is the signal-mapping, when using 16Bpp displays. 18Bpp is not supported in the current Windows CE drivers for Trizeps IV(M) and Trizeps V,, because of it many disadavantages compared to the win of 2 extra display-lines. If needed LDD16 and LDD17 are mounting options on pins 150 and 152 of the Trizeps-module Trizeps IV(M),Trizeps V). Trizeps VI can support 16, 18 and 24Bpp.
If more display-lines for each color are availlable for a display, connect the unused LSB-bits to ground. Usually displays also have additional control-lines for backlight and power. See bitmapboot on how to configure those options; i.e. backlight-PWM or power-enable GPIO's.

Signal-Name	SODIMM-Pin	16Bpp	18Bpp (see above note)	24Bpp (Trizeps VI only)

Signal-Name	SODIMM-Pin	16Bpp	18Bpp (see above note)	24Bpp (Trizeps VI only)
LDD0	76	blue[0] LSB	blue[0] LSB	blue[0] LSB
LDD1	70	blue[1]	blue[1]	blue[1]
LDD2	60	blue[2]	blue[2]	blue[2]
LDD3	58	blue[3]	blue[3]	blue[3]
LDD4	78	blue[4] MSB	blue[4]	blue[4]
LDD5	72	green[0] LSB	blue[5] MSB	blue[5]
LDD6	80	green[1]	green[0] LSB	blue[6]
LDD7	46	green[2]	green[1]	blue[7]
LDD8	62	green[3]	green[2]	green[0] LSB
LDD9	48	green[4]	green[3]	green[1]
LDD10	74	green[5] MSB	green[4]	green[2]
LDD11	50	red[0] LSB	green[5] MSB	green[3]
LDD12	52	red[1]	red[0] LSB	green[4]
LDD13	54	red[2]	red[1]	green[5]
LDD14	66	red[3]	red[2]	green[6]
LDD15	64	red[4] MSB	red[3]	green[7] MSB
LDD16	64	red[4] MSB	red[4]	red[0] LSB
LDD17	64	-	red[5]	red[1]
LDD18	176	-	red[6] MSB	red[2]
LDD19	174	-	-	red[3]
LDD20	172	-	-	red[4]
LDD21	170	-	-	red[5]
LDD22	180	-	-	red[6]
LDD23	178	-	-	red[7] MSB
L_DEN	44	Data Enable for active-displays, Bias for passive displays.
L_PCLK	56	Pixel Clock
L_HSYNC	68	Horizontal Sync
L_VSYNC	82	Vertical Sync