SOM-uQ7-MX6-2 (A75)
Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
SOM-uQ7-MX6-2 is an extremely low power and low cost μQseven Rev. 2.0 Compliant Module with the NXP i.MX6 Processor. It features all the native I/O capabilities of the SoC, in compliance with the Qseven standard, at the competitive cost of a proprietary module. This board is supplied with a complete and fully-featured BSP, for easy migration from, and to, the entire i.MX6 product family, along with dedicated hardware and software development support.
For ordering purposes, the SOM-uQ7-MX6-2 is referred to by its base code, “A75”.
INDEX
How can I power on my module?
https://secogroup.atlassian.net/l/c/V7HNXfuN
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.
What can I do now?
Blog Posts
-
How to Create a Recovery USB for SBC-3.5-PX30 (D23)
created by
02. Feb 2024
-
How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
created by
02. Feb 2024
-
Create a bootable device for ARM ROCKCHIP
created by
08. Jun 2022
-
Display Configuration Guide
created by
08. Oct 2021
-
Build SECO BSP for i.MX and Rockchip boards
created by
21. May 2021
-
Create a bootable device for ARM i.MX BSPs
created by
21. May 2021
-
Configure the host PC
created by
21. May 2021
Downloads
Clea OS
Starting from Linux Kernel version 5.10, the Board Support Package (BSP) for this board is fully integrated within Clea OS, the operating system for the All-In-One IIot platform CLEA developed by SECO and based on Yocto. Clea OS is intended to provide the highest standards in terms of security and stability thanks to features like OTA (Over the Air) updates, double partitions, and fallback procedures. Clea OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.
Source code
The source code for Clea OS can be found at the following Gitlab organization. To build a complete BSP image from source, you can follow the readme of the repo manifest.
Binaries
The binaries (U-Boot, Linux Kernel, Yocto image) associated with the various CleaOS releases can be found at the following Release page.
Legacy Software
Source code
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries
Here you can find the latest binaries available
Board configuration | Version | image | filesystem | u-boot | kernel |
---|---|---|---|---|---|
256M 1x256M | 4.19.35 - 3.4.0 | ||||
512M 2x256M | 4.19.35 - 3.4.0 | ||||
1G 2x512M | 4.19.35 - 3.4.0 |