SOM-COM-HPC-A-RPL (D80)
Depending on the configuration and following revisions, the features of the board are subject to change. For detailed information on hardware specifications, please visit www.seco.com
SECO SOM-COM-HPC-A-RPL is a COM-HPC® Client Computer on Module (CoM) Size A with 13th-14th Gen Intel® Core™ (formerly Raptor Lake H/P/U series) Processors
For ordering purposes, the SECO SOM-COM-HPC-A-RPL is referred to by its base code, “D80”.
INDEX
How can I power on my module?
With Cross Platform Development Kit for COM-HPC.
For further details about hardware configuration, please visit DEV-KIT-COM-HPC-A
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built in accordance with customers' requirements submitting a new ticket.
The BIOS version updated in your module is shown in Aptio Setup Utility menu under:
Main page
Advanced > SMBIOS Information page
BIOS binaries are available in the Downloads section.
How can I update BIOS?
How can I update BIOS through BGT utilities? - SECO Technical Resources - Confluence
What can I do now?
Visit our Blog to find some tips!
Blog Posts
-
Using AMISCE to Update BIOS Settings
created by
06. Oct 2022
-
How can I change BIOS logo?
created by
25. May 2021
-
How can I modify SMBIOS information?
created by
24. May 2021
-
How can I define a boot sequence in UEFI mode and perform pre-boot operations?
created by
17. May 2021
-
What is SecureBoot and how can I enable it?
created by
14. May 2021
-
How can I boot from LAN?
created by
14. May 2021
-
How can I create a bootable EFI USB device?
created by
14. May 2021
Downloads
The following are links to the current software releases:
BIOS | |
BIOS Tools | |
Driver WIN10 21H2 LTSC | |
EAPI |
Clea OS
This board is fully supported by Clea OS, the operating system for the All-In-One IIot CLEA platform developed by SECO and based on Yocto. Clea OS is intended to provide the highest standards in terms of security and stability through features such as OTA (Over the Air) updates, dual partitions and fallback procedures. Clea OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.
Source code
The source code for Clea OS can be found at the following Gitlab organization. To build a complete Yocto image from source, you can follow the readme of the repo manifest.
Binaries
The Yocto image binaries associated with the various Clea OS releases can be found at the following Release page.