...
The Trizeps6 can show a splash-screen during the device start. The Windows CE OS-image can then take the display-parameters from this splash-screen. This allows an easy change of the display, without the need to modify the Windows CE OS-image.
See BitmapBoot Tool ( Trizeps II - V) if you want to show a BootBitmap on Trizeps2,3,4 or 5.
...
The parameter names are the same as in the registry ( Display Parameters).
With the bootloader-command display, the display-controller is initialized with the current settings. boot nanddisk wince.bmp loads a picture with the name wince.bmp into the current framebuffer. The last two lines are specific to the ConXS and enable the backlight. When using a Trizeps6 without WLAN/Bluetooth, replace the last two lines with:
| Code Block |
|---|
0x10 0xbd700000 !16 |
See Trizeps6 CPLD for details.
Store Boot Script and Picture
...