...
Applies to: Trizeps IV(M), Trizeps IV WL, Trizeps V, Trizeps VI.
See also: SD/SDIO/MMC.
Schematic
Typical connection of a SD-Card Slot
...
This is the minimum configuration for a SD-Card-Slot. Check with Keith & Koep Seco wether leaving the SDIO_CARD_DETECT-signal floating is supported by the BSP. Otherwise you need to connect SDIO_CARD_DETECT with a pull-up to 3.3V. The big disadvantage is, that you can't add or remove cards while the OS
...