Page Comparison

Eval-Kit Specification

• 1pc of RB79-0000-0000-I2 ( Carrierboard)

• 1pc of CV-904/20REVB (Serial adapter cable for SA44)

• 1pc of CV-874/20 (Power adapter cable)

• 1pc of 4026241M1X030 (Batterie Litium CR2032 3V 210mAh)

• 1pc of CV-890/10 ( Powersupply + adapter)

• 1pc of FN070PGRGUL037C (Display)

• 1pc of CV-1408/750 (LVDS cable)

• 1pc of CV-1392/530 (USB cable for Touch)

...

• eMMC (up to 64 GByte)

• 2x 1Gbit Ethernet

• TPM

• USB 2.0 Hub (4x)

• eDP

• RTC

• EEPROM

• WLAN 802.11 a/b/g/n/ac and BT 5.3 Combo module (M.2 1216)

Software (OS Images)

Initial Setup

First mount the SOM-SMARC-MX93 Module into the Baseboard, add the battery to the battery-socket. Connect the LVDS-Cable to the Display and CN14 of the Baseboard and connect it powercable to the baseboard, prepare the usb-Touchscreen connection. Normally OS ist preinstalledThe OS is stored on the µSD-card which will be placed in CN77 . ( If not you will find a list of available Images for downlod in the chapter Software.)For power please use the powersupply and the adapter of the Eval-Kit

The Eval-kit is equipped with a Powersupply incl. adapter which can be user for this evaluation-system.

Now you can power up the system.

...