...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
By a USB - Flash Drive
| Table of Contents |
|---|
This document describes the step-by-step guide for updating the Operating System (Firmware) in the device former G&F devices using a USB Flash Drive.
Instructions
Please follow the given steps to update the Operating system through the USB Stick.
Identify architecture and firmware
Take an empty USB stick and plug it into the development machine.
Enter into the Seco website using the link
Click on Products and services in the Header and select Seco Edge
Click on Products Catalog and select HMI from the dropdown.
Scroll down to the Category section and select the category of your device. (eg: If you have a Flush mount Santaro device you can select Flush mount)
If you need some help in finding the category of your device you can check the following video from Seco in the following link.
Select the device which you have by using the Name and the display size. (eg: Look at the back of the Santaro device and find the name and the display size and select the same device details in the web page.)
Check the processor or CPU type of the device after finding the device with the name and the display size
...
Download firmware
Scroll down to the software section in the Product details.
If you can not find the latest software which is needed, click on the Releases page in the followiong link.
Click on the software which you need for your device. (eg: Download Dunfell-14 which is the latest)
Select the processor name of the device.(eg: imx6guf for the Santaro device)
We can find the image files which we need to download.
Download the BUILD_SRCREVS, fng-install, guf-image-imx6guf.manifest, guf-image-imx6guf.tar, guf-image
...
-imx6guf.testdata, license.manifest, md5sums, metainfo and pkg files in the development machine.
Prepare the USB Flash drive
Place the downloaded files in the root directory on the USB flash drive
...
Insert the Flash drive in to the Device which needs to be updated.
Connect the device to pc using serial cable
Connect the device and the host machine(Laptop) by using the serial cable.
...
Open any terminal emmulator program (eg:Tera term) in the Host machine (laptop) by using the serial cable (RS-232, USB cable, etc)
Change the serial port settings in the application and click on new settings when we try to connect through RS232 cable.
...
Entering Flash and Go mode
Login to the terminal as root user by entering the command (By default the root user may not have password)
| Code Block |
|---|
root |
...
cd / |
Boot in to the Flash and Go mode by entering the following command.
| Code Block |
|---|
bootselect alternative |
...
Reboot the device by entering the command
| Code Block |
|---|
reboot |
...
The device will boot up in to the flash and go mode
Flash Firmware
...
Enter the command to get into the root folder of USB stick.
| Code Block |
|---|
cd /mnt/mstick1 |
...
Execute the installation script by entering the command
| Code Block |
|---|
./fng-install.sh |
...
...
Enter the command to boot in to the regular operating system.
| Code Block |
|---|
bootselect regular reboot |
| Info |
|---|
The Operating system will not get installed if we install the OS of a different device or processor. |
Updating Flash-N-Go components
Please note that you can update Flash-N-Go boot and Flash-N-Go System the same way as described above. Each release contains an appropriate update script.