Versions Compared

Old Version 5

changes.mady.by.user Albinleo Velappan

Saved on

compared with

New Version Current

changes.mady.by.user Bernd Mierzowski

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

...

  • Take an empty USB stick and plug it into the development machine.

  • Enter into the Seco website using the link

  • Click on Products and services in the Header and select Seco Edge

  • Click on Products Catalog and select HMI from the dropdown.

  • Scroll down to the Category section and select the category of your device. (eg: If you have a Flush mount Santaro device you can select Flush mount)

  • If you need some help in finding the category of your device you can check the following video from Seco in the following link.

  • Select the device which you have by using the Name and the display size. (eg: Look at the back of the Santaro device and find the name and the display size and select the same device details in the web page.)

  • Check the processor or CPU type of the device after finding the device with the name and the display size

...

Download firmware

  • Scroll down to the software section in the Product details.

  • If you can not find the latest software which is needed, click on the Releases page in the followiong link.

  • Click on the software which you need for your device. (eg: Download Dunfell-14 which is the latest)

  • Select the processor name of the device.(eg: imx6guf for the Santaro device)

  • We can find the image files which we need to download.

  • Download the BUILD_SRCREVS, fng-install, guf-image-imx6guf.manifest, guf-image-imx6guf.tar, guf-image-imx6guf.testdata, license.manifest, md5sums, metainfo and pkg files in the development machine.

...

  • Connect the device and the host machine(Laptop) by using the serial cable.

...

  • Open any terminal emmulator program (eg:Tera term) in the Host machine (laptop) by using the serial cable (RS-232, USB cable, etc)

  • Change the serial port settings in the application and click on new settings when we try to connect through RS232 cable.

    Image RemovedImage Added

Entering Flash and Go mode

...

Info

The Operating system will not get installed if we install the OS of a different device or processor.

Updating Flash-N-Go components

Please note that you can update Flash-N-Go boot and Flash-N-Go System the same way as described above. Each release contains an appropriate update script.