End Of Life (Ende Produkt-Lebenszyklus) for Trizeps VI with PXA168 (800/1100 MHz). For more information, please see below.
Description
Marvell Sheeva PXA168 CPU up to 1.1 GHz (core compatible to well known: XScale technology)
128 or 256 MByte DDR2-RAM (512MB possible as soon as DDR2 with this density availlable)
128,256 or 512 MByte NAND-Flash
1 x Micro SD Socket on board ( storage enhancement up to 32GB with uSDHC-cards possible.)
LCD support up to WUXGA (1920×1200), 12/16/18 and 24bpp active or passive color panels.
1 x USB 2.0 Highspeed Host
1 x USB 2.0 Highspeed OTG (Host+Slave)
PCI-Express
WLAN 802.11 b/g
Bluetooth v2.0 + EDR
100/10 MBit Ethernet.
3 Serial Interfaces (UART)
2 x SD/MMC/SDIO card interface, 4Bit wide
4-in-1 card reader (xD-memory, MMC, SD, Memory Stick)
Compact Flash card interface
Camera Interface
SPI, I2C, PWM
CPLD (128 or 256 Macrocells)
20 Bit Stereo, low-noise design, programmable sampling rates, headphone out
Line input stereo and Microphone input (mono) for electret-capacitor microphones
4-wire resistive touch interface
4 x 10 Bit ADC
DDR-SODIMM-200 connector (eg. AMP 1376408-1) compatible to Trizeps-III, Trizeps-IV, Trizeps-IV WL and Trizeos-V series.
High efficency switch-mode core voltage regulator with dynamic core voltage support
Supply with single +3V3 or direct LiIon input (Assembly Option)
Technical Documents
Datasheet: trizepsvi_datasheet_v2.01.pdf
Change notice CODEC, LAN8710: pcn_tvi_codec.pdf
Change notice: tr6_v1r1_to_r2_change_notice.pdf
PXA168-Product-Brief:marvell_pxa168_product_brief.pdf
Pin List: sodimm200_standard_v3.xls
Technical Data Trizeps VI Product Page
Software
Baseboard & Panels
The Trizeps VI fits into following Seco products: