Trizeps V

Trizeps V Product Page
End Of Life (Ende Produkt-Lebenszyklus) for Trizeps CPU modules with Strata-Flash. More Information ...

• XScale PXA320 (806Mhz)

• 16/32MB NOR Flash Memory

• 128MB or 256MB Low-Power Mobile DDRAM

• UCB1400-Codec for Audio, Mic, Headphone and Touchscreen Interface

• Ethernet controller 100/10 MBit

• 2 x SDIO/SD/MMC, BT, IrDA, RS232, SPI, I2C

• 1 x Micro SD Socket onboard

• 1 x USB Host

• 1 x USB OTG (Host+Slave)

• USB 2.0 Highspeed Slave incl. Transceiver

• Camera Interface

• Compact Flash

Ordering Information

obsolete modules

Technical Documents

• Change notice CODEC: 20130213_pcn_tv_codec.pdf

• Pin List: sodimm200_standard_trv_vertraulich.pdf

• Advanced PXA320 Pin Information: pxa320_rev1_8_alternate_functions.xls

• Datasheet: 20150217_fulldoc_tv_v0_7.pdf

Technical Data and PDF document Trizeps V

EOL – End Of Life (Ende Produkt-Lebenszyklus)

• For Trizeps V with Marvell PXA320 CPU: 20190128 EOL Trizeps II, IV, V PXA270M-PXA320

Software

• Bootloader Trizeps V (PXA320)

• BSP for Trizeps V

Baseboard & Panels

The Trizeps V fits into following Seco products:

• ConXS

• nConXS

• iT6

• µConXS

• i-PAN7

3D Models

• 3D Model (stl) trizeps_v_010301.stl.zip

• 3D Model (step) trizeps_v_010301.stp.zip

• 3D Model (iges) trizeps_v_010301.igs.zip

• 3D Model (Rhino) trizeps_v_010301.3dm.zip

Power Requirements

These measurements are only an indication of typical power consumption.
It is recommended to use a 3,3V voltage-regulator with 1A nominal output.
Running: maximum current measured during benchmark-test.
Idle: minimum current measured while OS is running, with no user activity or additional applications running. Idle is entered and exit automatically during inactivity with no time penality.
Suspend: current measured during suspend state. Suspend is entered with a call to GwesPowerOffSystem() or Start→Suspend. Suspend state can be exit with different events ( i.e. touch-press). Time penality to exit suspend is about 1 second.

Trizeps-V with Ethernet (806MHz)

Running at 806MHz.
Bootloader-Version: 15.01.2009.
Windows Embedded CE 6.0 image based on MaxIE-project. (build 12.03.2009)
<columns> Running:
Idle:
Suspend: NEWCOL 510 mA
290 mA
51 mA </columns> If ethernet-controller is disabled ( power-mgmt) about 5mA can be saved in running and idle mode.

Trizeps-V without Ethernet (806MHz)

Running at 806MHz.
Bootloader-Version: 15.01.2009.
Windows Embedded CE 6.0 image based on MaxIE-project. (build 12.03.2009)
<columns> Running:
Idle:
Suspend:
NEWCOL 465 mA
235 mA
2,1 mA </columns>

Trizeps-V with Ethernet (624MHz)

Running at 624MHz.
Bootloader-Version: 15.01.2009.
Windows Embedded CE 6.0 image based on MaxIE-project. (build 12.03.2009)
<columns> Running:
Idle:
Suspend: NEWCOL 460 mA
285 mA
51 mA </columns> If ethernet-controller is disabled ( power-mgmt) about 5mA can be saved in running and idle mode.