The ConXT is a baseboard, which allows customers to easily build an industrial panel solution.
It can be combined with different Displays: 7inch RGB, 10.1inch LVDS or even multi-monitor systems using the RGB, LVDS or Dual-LVDS display interfaces.
Seco offers the i-PAN XT-Pro 10 Touchpanel Computer, which uses the ConXT baseboard, please look at:
i-PAN XT-Pro 10 Product Page.
i-PAN XT-Pro 10 Support Page.
ConXT Baseboard - functionality
Figure: Simplified Block Diagram of ConXT
COM2: RS232/RS485/RS422 Switch
SW1 | ||||
|---|---|---|---|---|
1 | 2 | 3 | 4 | Setting |
off | off | off | off | allow software to configure port |
on | on | x | x | RS232 |
on | off | x | x | RS232 |
off | on | x | x | RS422 |
off | off | x | x | RS485 |
x | x | on | x | Disable RS485 Termination |
x | x | off | x | Enable RS485 Termination |
x | x | x | on | RS485/422: enable receive |
x | x | x | off | RS485/422: disable receive |
The ConXT features:
Intelligent Panel solution
Based on Trizeps CPU modules with SODIMM200 technology
LVDS, parallel RGB Display port and optional Dual-LVDS
Resistive or capacitive touch
USB2.0 host, USB2.0 OTG
SD/SDIO card socket
2x RJ45 10/100Mbit Ethernet
COM1 (RS232)
COM2 (RS232, RS485 or RS422)
2x CAN (isolated)
12/24V IOs (4x inputs, 3 of them with ADC; 4x outputs)
analog PAL-camera (Cinch)
UPS (uninterruptable power supply)
Realtime-clock with backup through coin-cell battery
2x LEDs
2,6W Audio amplifier
FFC extension connector with USB,I2C and GPIOs.
Operating System for ConXT
Currently we support Windows Embedded Compact 7, Windows Compact 2013, Linux and Android as operating system.
Board Support Packages (BSP) are free for download and allow our customers to built their own OS.
Because the ConXT may be equipped with different Modules, use the following links in the Modules-chapter to get OS-Images and the Board-Support-Package.
Modules
This panel may be equipped with one of the following modules:
Technical Documents
Datasheet:ConXT V1.0
3D Models (no warranty)
STEP:
STL:
PDF: