Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

This product is still in pre-series phase, samples can be ordered by contacting the SECO sales channel. The software resources on this page are not yet fully finalised and validated.

Depending on the configuration and following revisions, the features of the board are subject to change. For detailed information on hardware specifications, please visit www.seco.com

SMARC® Rel. 2.1 compliant Computer on Module (CoM) with Intel® Atom® processors x7000E Series, Intel® Core™ i3 processor, Intel® Processors N Series (Codename: Alder Lake N)

For ordering purposes, the SOM-SMARC-ADL-Nis referred to by its base code, “E08”.

INDEX


How can I power on my module?

With SMARC Development Kit for CSM-B79

For further details about hardware configuration, please visit DEV-KIT-SMARC


What is loaded in a standard module?

Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built in accordance with customers' requirements submitting a new ticket.

The BIOS version updated in your module is shown in Aptio Setup Utility menu under:

  • Main page

  • Advanced > SMBIOS Information page


Updating the BIOS

https://secogroup.atlassian.net/l/c/6PB1jhmQ


Further Reading

Visit our Blog to find some tips!

Blog Posts


Downloads

This product is still in pre-series phase, samples can be ordered by contacting the SECO sales channel. The software resources on this page are not yet fully finalised and validated.

Edgehog OS

This board is fully supported by Edgehog OS, the operating system for the All-In-One IIot CLEA platform developed by SECO and based on Yocto. Edgehog OS is intended to provide the highest standards in terms of security and stability through features such as OTA (Over the Air) updates, dual partitions and fallback procedures. Edgehog OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.

Source code:

The source code for Edgehog OS can be found at the following Gitlab organization. To build a complete Yocto image from source, you can follow the readme of the repo manifest.

Binaries: 

The Yocto image binaries associated with the various Edgehog OS releases can be found at the following Release page.

  • No labels