SBC-3.5-MX8X (C57)
|
|
|
|
|
Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
SBC-3.5-MX8X is a 3.5” SBC with NXP i.MX 8X family of SoCs, featuring Dual or Quad Arm Cortex®-A35 Cores + 1x Cortex® M4F core for real-time processing. It comes with an embedded GC7000Lite GPU with up to 16 Execution Units, together with and embedded VPU, and its range of networking and connectivity interfaces is impressive. SBC-3.5-MX8X Single Board Computer is ideal for certified performance requirements and safety efficient, and it’s well suited for industrial automation and control, robotics, transportation, in-vehicle infotainment systems.
For ordering purposes, the SBC-3.5-MX8X is referred to by its base code, “C57”.
INDEX
How can I power on my module?
https://secogroup.atlassian.net/l/c/V7HNXfuN
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.
What can I do now?
Blog Posts
-
How to Create a Recovery USB for SBC-3.5-PX30 (D23)
created by
02. Feb 2024
-
How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
created by
02. Feb 2024
-
Create a bootable device for ARM ROCKCHIP
created by
08. Jun 2022
-
Display Configuration Guide
created by
08. Oct 2021
-
First board boot
created by
23. Sep 2021
-
Build SECO BSP for i.MX and Rockchip boards
created by
21. May 2021
-
Create a bootable device for ARM i.MX BSPs
created by
21. May 2021
-
Configure the host PC
created by
21. May 2021
Downloads
Source code:
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries:
Here you can find the latest binaries available
Board configuration | Version | image | filesystem | u-boot | kernel |
|---|---|---|---|---|---|
All | 4.19.35 - 3.8.0 |
Known Issues
Issue ID | Description | Impacted HW Revision | Impacted SW Version | Fix |
|---|---|---|---|---|
C57-ISS-1 | Wi-Fi hangs with Scan command timeout (0x107) if the scan occurs at the same time as A2DP streaming and BLE scanning. | ALL | ALL | Workaround: don’t perform Wi-Fi scan, BLE scan and A2DP streaming simultaneously. |