SBC-3.5-MX8M-Mini (C61)
|
|
|
|
|
Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
SBC-3.5-MX8M-Mini is a 3.5” SBC with the NXP i.MX 8M Mini Processors. It stands out for its connectivity, with up to 2x GbE, optional Wi-Fi, up to 2x RS-232 or RS-485 or CAN and opt modems with SIM slot or eSIM. GPU-wise, it mounts GC320 2D accelerator + GCNano Ultra 3D accelerator, and the memory consists of a soldered-down LPDDR4 memory, up to 4GB total. All these features make this SBC well suited for Internet of Things applications, edge computing, multimedia devices and visual computing.
For ordering purposes, the SBC-3.5-MX8M-Mini is referred to by its base code, “C61”.
INDEX
How can I power on my module?
https://secogroup.atlassian.net/l/c/V7HNXfuN
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.
What can I do now?
Blog Posts
-
How to Create a Recovery USB for SBC-3.5-PX30 (D23)
created by
02. Feb 2024
-
How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
created by
02. Feb 2024
-
Create a bootable device for ARM ROCKCHIP
created by
08. Jun 2022
-
Android 11 SECO BSP
created by
25. Feb 2022
-
Display Configuration Guide
created by
08. Oct 2021
-
First board boot
created by
23. Sep 2021
-
Build SECO BSP for i.MX and Rockchip boards
created by
21. May 2021
-
Create a bootable device for ARM i.MX BSPs
created by
21. May 2021
-
Configure the host PC
created by
21. May 2021
Downloads
Edgehog OS
Starting from Linux Kernel version 5.10, the Board Support Package (BSP) for this board is fully integrated within Edgehog OS, the operating system for the All-In-One IIot platform CLEA developed by SECO and based on Yocto. Edgehog OS is intended to provide the highest standards in terms of security and stability thanks to features like OTA (Over the Air) updates, double partitions, and fallback procedures. Edgehog OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.
Source code:
The source code for Edgehog OS can be found at the following Gitlab organization. To build a complete BSP image from source, you can follow the readme of the repo manifest.
Binaries:
The binaries (U-Boot, Linux Kernel, Yocto image) associated with the various Edgehog OS releases can be found at the following Release page.
Legacy Software
Source code:
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries:
Here you can find the latest binaries available
Board configuration | Version | image | filesystem | u-boot | kernel |
|---|---|---|---|---|---|
All | 4.19.35 - 3.4.0 |