Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

End Of Life (Ende Produkt-Lebenszyklus) for Trizeps VI with PXA168 (800/1100 MHz). For more information, please see below.

Description

  • Marvell Sheeva PXA168 CPU up to 1.1 GHz (core compatible to well known: XScale technology)

  • 128 or 256 MByte DDR2-RAM (512MB possible as soon as DDR2 with this density availlable)

  • 128,256 or 512 MByte NAND-Flash

  • 1 x Micro SD Socket on board ( storage enhancement up to 32GB with uSDHC-cards possible.)

  • LCD support up to WUXGA (1920×1200), 12/16/18 and 24bpp active or passive color panels.

  • 1 x USB 2.0 Highspeed Host

  • 1 x USB 2.0 Highspeed OTG (Host+Slave)

  • PCI-Express

  • WLAN 802.11 b/g

  • Bluetooth v2.0 + EDR

  • 100/10 MBit Ethernet.

  • 3 Serial Interfaces (UART)

  • 2 x SD/MMC/SDIO card interface, 4Bit wide

  • 4-in-1 card reader (xD-memory, MMC, SD, Memory Stick)

  • Compact Flash card interface

  • Camera Interface

  • SPI, I2C, PWM

  • CPLD (128 or 256 Macrocells)

  • 20 Bit Stereo, low-noise design, programmable sampling rates, headphone out

  • Line input stereo and Microphone input (mono) for electret-capacitor microphones

  • 4-wire resistive touch interface

  • 4 x 10 Bit ADC

  • DDR-SODIMM-200 connector (eg. AMP 1376408-1) compatible to Trizeps-III, Trizeps-IV, Trizeps-IV WL and Trizeos-V series.

  • High efficency switch-mode core voltage regulator with dynamic core voltage support

  • Supply with single +3V3 or direct LiIon input (Assembly Option)

Technical Documents

  • Datasheet:

  • Change notice CODEC, LAN8710:

  • Change notice:

  • PXA168-Product-Brief:

Software

Baseboard & Panels

The Trizeps VI fits into following Seco products:

  • No labels