Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The i-MOD UART connector is a standard connector defined by Seco to allow customers to easily add functions to a baseboard.
Keith & Koep offers different extension boards ranging from a simple breakout board to RS232/RS485/RS422 transceiver boards.
Customers may design their own peripherals which can be connected through a 10pol FFC cable.

This is the pinning of the connector on the baseboard.
Extension boards use the opposite numbering scheme.
Inputs and outputs are in respect to the baseboard. i.e. the TXD output of the baseboard is an input to the extension board.

Pin

Signal

Function

1

UART1_RI

RI input

2

UART1_DCD

DCD Input

3

UART1_DSR

DSR input

4

GND

Power

5

+3V3

Power

6

UART1_RTS

RTS output

7

UART1_CTS

CTS input

8

UART1_TXD

TXD output

9

UART1_RXD

RXD input

10

UART1_DTR

DTR output

Connector: 687110149022 by Wuerth

i-MOD UART peripherals

Picture

Name

Description

Datasheet

iModCon RS232

Converts iMod Uart to RS232

imodcon_rs232_datasheet_v0.9.pdf

iModCon RS Combi

Converts iMod UART to RS232, RS485 or RS422

imodcon_rs_combi_datasheet_v1.0.pdf

Summary i-MOD solutions

Overview

  • No labels