• In progress

    • i-MOD UART i-MOD standard

    Owned by Anu Selvaraj (Deactivated)
    Last updated: 09. Dec 2022
    2 min read

    The i-MOD UART connector is a standard connector defined by Seco to allow customers to easily add functions to a baseboard.
    Seco offers different extension boards ranging from a simple breakout board to RS232/RS485/RS422 transceiver boards.
    Customers may design their own peripherals which can be connected through a 10pol FFC cable.

    This is the pinning of the connector on the carrier board.
    Extension boards use the opposite numbering scheme.
    Inputs and outputs are in respect to the baseboard. i.e. the TXD output of the baseboard is an input to the extension board.

    Pin

    Signal

    Function

    Pin

    Signal

    Function

    1

    UART1_RI

    RI input

    2

    UART1_DCD

    DCD Input

    3

    UART1_DSR

    DSR input

    4

    GND

    Power

    5

    +3V3

    Power

    6

    UART1_RTS

    RTS output

    7

    UART1_CTS

    CTS input

    8

    UART1_TXD

    TXD output

    9

    UART1_RXD

    RXD input

    10

    UART1_DTR

    DTR output

    Connector: 687110149022 by Wuerth

    i-MOD UART peripherals

    Picture

    Name

    Description

    Datasheet

    Picture

    Name

    Description

    Datasheet

    iModCon RS232

    Converts iMod Uart to RS232

     

     

    iModCon RS Combi

    Converts iMod UART to RS232, RS485 or RS422