...
Trizeps IV WL EEPROM Configuration
Configuration of the Trizeps IV WL EEPROM is only needed in special cases.
If advanced settings or wireless testing is required, request the tools from Keith & Koep. The NXP-PCTI-tool will need a special adapter connected to the Trizeps-module.
...
The Customer Section is organized with a list of information-elements. See BGW211 EEPROM Configuration Guide for details.
2 Bytes | n Bytes | 2 Bytes |
|---|---|---|
Length of Customer Section (= n Bytes for elements) | Elements | Checksum |
1 Byte | 1Byte | n Bytes |
|---|---|---|
Element ID | Length of Element | Content of Element |
Usage of the PCTI Tools v1.1
Connect PC with the BGW211 using UART.
Click Connect DUT.
Choose PCTI Firmware with
Open(\PCTI_Toolset_1.1\Testware\1.4.2.3\UART\mmc_211.rec ).Load Firmware with
Write.Go to Tab
EEPROM.
...
With EEPROM Read you may read the Manufacturer or Customer Section. The picture shows the behaviour if the Customer Section was empty.
...
With File Read you can read an external file (i.e. : PCTI_CustomerSection.txt).
...
After loading the file, its content is displayed. With Write you can write this file to EEPROM. Do not overwrite the Manufacturer Section!!!
...
How to Test
Load PCTI-Firmware and use following forms:
...