Page Comparison

...

This describes the settings for the USB driver of the Trizeps-module.

Trizeps 4

The Trizeps IV(M) has three USB-Ports:

• USB-Host

• USB-OTG

• USB-Slave

If a cable is attached to the USB-Slave port, the USB-OTG port is automatically disabled. After deattach of the cable it gets reconnected.

Trizeps 5

The Trizeps V has three USB-Ports:

• USB-Host

• USB-OTG

• USB-Slave (HighSpeed)

...

 0   Only use Full-Speed for USB-Slave port. Note that this does not work, 
     if the module is attached to a USB-hub.
 1   Use High-Speed.

Trizeps 6

The Trizeps VI has two USB-Ports:

• USB-Host (HighSpeed)

• USB-OTG (HighSpeed)

...

(* more info) switchingusbfn.

See Also

switchingusbfn,
Connect USB-Host-Connector to a Trizeps,
Connect USB-Slave-Connector to a Trizeps