| Table of Contents |
|---|
Eval-Kit Contents
12-24 V power supply
Acrylic stand
USB-A (male to male) cable
Serial cable
Suggested Software
Access via Serial Interface
Connect the baseboard to a computer using a serial cable and a serial adapter.
You will need a Tera Term application to communicate with the device.
In Tera Term configure the serial connection in Setup-> Serial Port. Set the following settings:
Port: serial port, to which device is connected
Speed: 115200
Data: 8bit
Parity: none
Stop bits: 1
Plug the power connector in, the device will boot up, you should see the terminal output if settings are correct, and correct port is selected.