pConXS III + Trizeps VIII Series

Owned by Oleksii Kutuzov
Last updated: 28. May 2024 by Michael Schieren
2 min read

Eval-Kit Specification (Without Trizeps Module)

 

  • Frame with Baseboard pConXS III and Display

  • 12-24 V power supply 

  • Acrylic stand

  • USB-A (male to male) cable

  • Serial cable

 

pConXS mit Agenda-20240528-123415.png

Features

  1. Vin 12V-24V DC

  2. VIN_FUSED Supply and Power failure GPIO for USV

  3. 2x USB Host/ 1x USB-OTG

  4. 10/100 MBit Ethernet

  5. Audio (Stereo Headphone, Microphone , Line-In, Speaker out)

  6. LVDS-Display , HDMI, RGB

  7. UART, RS-232, CAN, SDIO, I2C

 

Software (OS Images)

Trizeps VIII Mini

OS

Bootloader

Kernel

Release

Download

OS

Bootloader

Kernel

Release

Download

Windows 10 IoT Enterprise

 

BSP 1-4-0

1-4-0 2023-04-11

Image

Android

 

 

 

 

Debian 12

2020.04 / kuk_imx_v2020.04

 

2024-03-26

Trizeps VIII Mini-pConXS-bookworm

Debian 10.3

2020.04 / kuk_imx_v2020.04

5.10 / kuk_lf-5.10.y_android-compilable

2023-05-26

debian-10.3-lxde

Yocto

2020.04 / kuk_imx_v2020.04

5.10 / kuk_lf-5.10.y_android-compilable

2023-05-30

hardknott_weston_chromium-20230530.imz

Trizeps VIII Plus

OS

Bootloader

Kernel

Release

Download

OS

Bootloader

Kernel

Release

Download

Windows 10 IoT Enterprise

 

 

 

 

Android

 

 

 

 

Debian 12

2020.04 / kuk_imx_v2020.04

 

2024-03-26

seco_tr8plus-pconxs_bookworm_20240326

Yocto

2020.04 / kuk_imx_v2020.04

 

2024-04-28

trizeps8plus-pconxs-v3-hardknott_weston_chromium-20230428.imz

Initial Setup

In general the Eval-Kit is pre-configured and tested with the OS you ordered.

Please check if all connections are correct.

If needed prepare everything for debug connection by using connector U12. ( for details next chapter)

Plug in the power adapter into the 12V Jack (J17) and 120VAC~240VAC to power source.

The system will start up and OS will be visible on the Display. The Boot messages are printed within the PC terminal window.

 

 

Establish a Serial Connection

  1. Connect the baseboard to a computer using a serial cable and a serial adapter. 

  2. You will need a Tera Term application to communicate with the device.

  3. In Tera Term configure the serial connection in Setup-> Serial Port. Set the following settings:

    • Port: serial port, to which device is connected 

    • Speed: 115200 

    • Data: 8bit 

    • Parity: none 

    • Stop bits: 1 

  4. Plug the power connector in, the device will boot up, you should see the terminal output if settings are correct, and correct port is selected. 

Links

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1615233131

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1445822733/U-Boot+Trizeps+VIII+Mini#How-to-Make-U-Boot-for-Trizeps-VIII-Mini

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1445953782/U-Boot+Trizeps+VIII+Plus#How-to-Make-U-Boot-for-Trizeps-VIII-Plus

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1445888231/Linux+5.10+Trizeps+VIII+-+Mini+Plus#How-to-Build-Linux-Kernel-for-Trizeps-VIII-%26-Trizeps-VIII-Mini

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1614348345

How to deploy Windows 10 IoT Enterprise to Trizeps VIII Mini / Trizeps VIII Plus