(by Michael Schieren, Application Engineer)
This document explains explains the process of installing our Windows 10 IOT IoT Enterprise on the evaluation kit of Trizeps VIII Mini in in combination with pCon XS XS baseboard.
The Image is based on our Windows Windows 10 IoT Enterprise BSP Enterprise BSP 1.4.0, which is the latest release we provide.
It is necessary that the module is prepared is prepared with a Windows Windows compatible U-Boot firmware or was already used for Windows IoT.
...
Evaluation Kit
( including: pConXS III EVTV III EV TVIII, Powersupply 12/24V, Trizeps VIII Mini minMini min.16GB eMMC)
SD-Card with a capacity of min. 8 GB
PC with USB-Card reader for SD-card (for preparation)
Necessary SoftwareNecessary Software
USB Image Tool (can be downloaded here)
...
Preparation of the need SD-card
Flashing Flashing Windows IoT to eMMC
First boot
Finalized OS
...
We suggest to use a Windows System with the USB Image Tool. Insert SD-Card in your Cardreader and start the USB Image Tool. Select the SD-Card with a capacity of at least 8 GB. Than select restore.
...
Choose the Image ( make make .imz Images in file-selection visible) and confirm confirm to restore.
...
When the restore process has been finished you finished you can see following files on the SD-card.
...
2.Flashing Windows Flashing Windows IoT to eMMC
The image contains the Windows PE (Preinstallation Environment) as well as the files necessary to install Windows 10 IoT Enterprise on the eMMC of your device.
To deploy Windows 10 IoT Enterprise insert the SD-Card into the SD-Card slot of your ready assabled Evalkit assabled Evalkit Baseboard and connect power.
...
The system will start the WinPE boot environment and install the install the Windows 10 IoT Enterprise.
...
First you will see see a script running on screen to prepare the system, than you will see different messages from Windowsinstallation. This will take several minutes, please don’t interupt.
...
3.First boot
Make sure that teh the SD-card is removed and power on the System.
...
At beginning you get a screen with windows logowindows logo,
...
And finally finally you get this screen
...
4.Finalized Operating System
...
Finished, the system will show you the well known Windows DesktopWindows Desktop.
...
Now you can du do your Specific configuration, e.g. change devicename, activation or install install your apps.