Page Comparison

Table of Contents

Eval-Kit Contents

Table of Contents

style	none

...

‌

OS	Bootloader	Kernel	Release	Download
Windows 10 IoT Enterprise	2020.04 / kuk_imx_v2020.04	BSP 1-5-0	2024-05-03	IoTEntOnSECO_1-5-0
	2020.04 / kuk_imx_v2020.04	BSP 1-4-0	2023-04-11	winpe_enterprise_1-4-0_20230411
Android
Debian 12	2020.04 / kuk_imx_v2020.04	5.10.9 / kuk_lf-5.10.y_android-compilable	2024-03-27	seco_tr8mini-ipant7_bookworm_20240327
Yocto	2020.04 / kuk_imx_v2020.04	5.10 / kuk_lf-5.10.y_android-compilable	2023-05-30	hardknott_weston_chromium-20230530

OS	Bootloader	Kernel	Release	Download
Windows 10 IoT Enterp.
Android
Debian 12	2020.04 / kuk_imx_v2020.04	5.10.9 / kuk_lf-5.10.y_android-compilable	2024-03-27	seco_tr8plus-ipant7_bookworm_20240327
Yocto	2020.04 / kuk_imx_v2020.04	5.10 / kuk_lf-5.10.y_android-compilable	2023-05-12	trizeps8plus-ipant7-v2-hardknott_weston_chromium-20230512

In general the Eval-Kit is pre-configured and tested with the OS you ordered.

Please check if all connections are correct.

If needed prepare everything for debug connection by using connector U12. ( for details next chapter)

Plug in the power adapter into the 12V Jack (J17) and 120VAC~240VAC to power source.

The system will start up and OS will be visible on the Display. The Boot messages are printed within the PC terminal window.

Connect the baseboard to a computer using a serial cable and a serial adapter.
You will need a Tera Term application to communicate with the device.
In Tera Term configure the serial connection in Setup-> Serial Port. Set the following settings:
- Port: serial-port, to which device is connected connected
- Speed: 115200 115200
- Data: 8bit 8bit
- Parity: none none
- Stop bits: 1 1
Plug the power connector in, the device will boot up, you should see the terminal output if settings are correct, and correct port is selected.