• Ready for review

    • i-MOD standard

    Owned by Anu Selvaraj (Deactivated)
    Last updated: 09. Dec 2022
    1 min read

    The i-MOD standard ease the extension of Carrier Boards functionality. It is found on several boards designed “by Keith & Koep”.
    Reusing the same extension connectors on multiple Carrier Boards will allow customers to select between a variety of extension boards.
    Customers may select to build their own extension, which can be reused with our baseboards.

    i-MOD Interface 10pin FCC

    The i-MOD interface connector uses a 10pin 0.5mm pitch flat-cable-connector.
    The idea is to reuse the same connector for different interfaces.
    The basic pinning is such (seen from the view of the baseboard):

    Pin

    Function

    Pin

    Function

    Pin

    Function

    Pin

    Function

    1

    +5V or Input

    2

    differential IO or Input

    3

    differential IO or Input

    4

    GND

    5

    +3V3

    6

    Output

    7

    Input

    8

    Output

    9

    Input

    10

    Output

    •  

    •  

    •  

    •  

    i-MOD Display 40pin FCC

    •