/
SBC-pITX-APL (C41)

SBC-pITX-APL (C41)

Owned by Martina Bassi (Deactivated)
Last updated: 10. Mar 2025 by Luca Pisani
3 min read

 

Depending on the configuration and following revisions, the features of the board are subject to change. For detailed information on hardware specifications, please visit www.seco.com

SBC-pITX-APL is a Pico-ITX Single Board Computer featuring Intel® Atom® X Series, Intel® Celeron® J/N Series and Intel® Pentium® N Series Processors and integrated Intel® HD graphics 500 series controller. This board fits any application requiring multiple video displays, from edge computing and IoT to industrial control and info kiosks.

For ordering purposes, the SBC-pITX-APL is referred to by its base code, “C41”.

 

INDEX

How can I power on my module?

How can I configure jumpers?

Component

Use

Default configuration (Fig.1)

Component

Use

Default configuration (Fig.1)

CN5

Set jumper 1-2 for 5V LCD voltage
Set jumper 2-3 for 3.3V LCD voltage

2-3 Plugged

CN6

Set jumper 1-2 for 12V backlight voltage Set jumper 2-3 for 5V backlight voltage

2-3 Plugged

 

 

 

 

Fig. 1: Description of possible configuration for jumpers

 

 

What will I find in my module?

Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built in accordance with customers' requirements submitting a new ticket.

The BIOS version updated in your module is shown in Aptio Setup Utility menu under:

  • Main page

  • Advanced > SMBIOS Information page

BIOS binaries are available in the Downloads section.

How can I update BIOS?

https://secogroup.atlassian.net/l/c/6PB1jhmQ

What can I do now?

Visit our Blog to find some tips.

Blog Posts

Downloads

Here you can find the latest releases:

BIOS

C41_Official_BIOS_1-19-01.7z

BIOS Tools

seco_apollolake_tools.7z

Driver WIN10 2016 LTSC

seco_apollolake_drivers_win2016.7z

Driver WIN10 2019/2021 LTSC

seco_apollolake_drivers_win10_2019_2021.7z

Driver Ubuntu I2C-SPI

seco_apollolake_drivers_ubuntu_i2c-spi.7z

Yocto BSP

seco_apollolake_yocto-pyro_bsp1-0.7z

EAPI

https://git.seco.com/software/eapi/eapi/-/wikis/home

Clea OS

This board is fully supported by Clea OS, the operating system for the All-In-One IIot CLEA platform developed by SECO and based on Yocto. Clea OS is intended to provide the highest standards in terms of security and stability through features such as OTA (Over the Air) updates, dual partitions and fallback procedures. Clea OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.

Source code

The source code for Clea OS can be found at the following Gitlab organization. To build a complete Yocto image from source, you can follow the readme of the repo manifest.

Binaries

The Yocto image binaries associated with the various Clea OS releases can be found at the following Release page.