Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Eval-Kit Contents

  • 12-24 V power supply 

  • Acrylic stand

  • USB-A (male) to micro USB cable

  • Serial cable

Suggested Software

Access via Serial Interface

  1. Connect the baseboard to a computer using a serial cable and a serial adapter. 

  2. You will need a Tera Term application to communicate with the device.

  3. In Tera Term configure the serial connection in Setup-> Serial Port. Set the following settings:

    • Port: serial port, to which device is connected 

    • Speed: 115200 

    • Data: 8bit 

    • Parity: none 

    • Stop bits: 1 

  4. Plug the power connector in, the device will boot up, you should see the terminal output if settings are correct, and correct port is selected. 

Build u-boot

Trizeps 8 Mini

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1445822733/U-Boot+Trizeps+VIII+Mini#How-to-Make-U-Boot-for-Trizeps-VIII-Mini

Trizeps 8 Plus

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1445953782/U-Boot+Trizeps+VIII+Plus#How-to-Make-U-Boot-for-Trizeps-VIII-Plus

Build Linux Kernel

https://secogroup.atlassian.net/wiki/spaces/SECONorthTech/pages/1445888231/Linux+5.10+Trizeps+VIII+-+Mini+Plus#How-to-Build-Linux-Kernel-for-Trizeps-VIII-%26-Trizeps-VIII-Mini

Deploy Images

Linux

Deploy Debian

Windows 10 IoT Enterprise (Trizeps 8 Mini)

How to deploy Windows 10 IoT Enterprise to Trizeps VIII Mini

  • No labels