pConXS + Trizeps 8 Mini/Plus

Eval-Kit Contents

• 12-24 V power supply 

• Acrylic stand

• USB-A (male to male) cable

• Serial cable

Suggested Software

• http://www.teraterm.org/

• USB Image Tool

Access via Serial Interface

1. Connect the baseboard to a computer using a serial cable and a serial adapter. 

2. You will need a Tera Term application to communicate with the device.

3. In Tera Term configure the serial connection in Setup-> Serial Port. Set the following settings:

   • Port: serial port, to which device is connected 

   • Speed: 115200 

   • Data: 8bit 

   • Parity: none 

   • Stop bits: 1 

4. Plug the power connector in, the device will boot up, you should see the terminal output if settings are correct, and correct port is selected. 

Build u-boot

Build Linux Kernel

Deploy Images

Linux

Windows 10 IoT Enterprise (Trizeps 8 Mini)