SOM-SMARC-APL (B69)

Depending on the configuration and following revisions, the features of the board are subject to change. For detailed information on hardware specifications, please visit www.seco.com

SOM-SMARC-APL is a SMARC Rel. 2.0 compliant module with the Intel® Atom® X Series, Intel® Celeron® J / N Series and Intel® Pentium® N Series (formerly Apollo Lake) Processors. This high performance, low power and feature-rich solution is able to run up to 3 independent displays, and it features Dual Channel Soldered Down LPDDR4-2400 memory (up to 8GB), 2 x Gigabit Ethernet interfaces and 2 x MIPI CSI interfaces.

For ordering purposes, the SOM-SMARC-APL is referred to by its base code, “B69”.

INDEX

1 Powering Up the Module
2 What is Loaded on a Standard Module?
3 Updating the BIOS
4 Further Reading
5 Downloads

Powering Up the Module

With CSM-B79

For further details about hardware configuration, please visit https://secogroup.atlassian.net/l/c/ciaL6fm2

What is Loaded on a Standard Module?

Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built in accordance with customers' requirements submitting a new ticket.

The BIOS version updated in your module is shown in Aptio Setup Utility menu under:

Main page
Advanced > SMBIOS Information page

BIOS binaries are available in the Downloads section.

Updating the BIOS

https://secogroup.atlassian.net/l/c/6PB1jhmQ

Downloads

Here you can find the latest releases:

BIOS	B69_Official_BIOS_1-19-01.7z
BIOS Tools	seco_apollolake_tools.7z
Driver WIN10 2016 LTSC	seco_apollolake_drivers_win2016.7z
Driver WIN10 2019/2021 LTSC	seco_apollolake_drivers_win10_2019_2021.7z
Driver Ubuntu I2C-SPI	seco_apollolake_drivers_ubuntu_i2c-spi.7z
Yocto BSP	seco_apollolake_yocto-pyro_bsp1-0.7z
EAPI	https://git.seco.com/software/eapi/eapi/-/wikis/home

Clea OS

This board is fully supported by Clea OS, the operating system for the All-In-One IIot CLEA platform developed by SECO and based on Yocto. Clea OS is intended to provide the highest standards in terms of security and stability through features such as OTA (Over the Air) updates, dual partitions and fallback procedures. Clea OS integrates a Device Manager to communicate with the Cloud and allows a family of products to be managed as a fleet.

Source code

The source code for Clea OS can be found at the following Gitlab organization. To build a complete Yocto image from source, you can follow the readme of the repo manifest.

Binaries

The Yocto image binaries associated with the various Clea OS releases can be found at the following Release page.

SECO Technical Resources