HAGAR (B08)
- Martina Bassi (Deactivated)
- Andrea Petrini
- Francesca Ghezzi
|
|
|
|
|
Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
HAGAR is an all-in-one low-cost computer designed by SECO, equipped with a NXP i.MX 6SoloX applications processor able to run Linux. HAGAR Single Board Computer is a great product in terms of connectivity, interactivity with the real world and cost: a new concept of single board computer ready for Internet of Things applications and for the Post-PC era.
For ordering purposes, the HAGAR is referred to by its base code, “B08”.
INDEX
How can I power on my module?
https://secogroup.atlassian.net/l/c/gzj1qAat
What will I find in my module?
Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.
What can I do now?
Blog Posts
-
How to Create a Recovery USB for SBC-3.5-PX30 (D23)
created by
02. Feb 2024
-
How to flash the SBC-3.5-PX30 (D23) eMMC/SDD
created by
02. Feb 2024
-
Create a bootable device for ARM ROCKCHIP
created by
08. Jun 2022
-
Display Configuration Guide
created by
08. Oct 2021
-
Build SECO BSP for i.MX and Rockchip boards
created by
21. May 2021
-
Create a bootable device for ARM i.MX BSPs
created by
21. May 2021
-
Configure the host PC
created by
21. May 2021
Downloads
Source code:
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries:
Here you can find the latest binaries available
Board configuration | Version | image | filesystem | u-boot | kernel |
|---|---|---|---|---|---|
SBC-B08 | 4.19.35 - 3.4.0 | ||||
SYS-B08-7 | 4.19.35 - 3.4.0 |